How to restring a compound bow without a press, If you’re an avid compound bow hunter or archer, you know the importance of keeping your bow in good working condition. Part of that maintenance includes restringing your bow every so often to ensure it performs optimally. While a bow press is typically used to safely and effectively restring a compound bow, it’s not always an option. Luckily, it is possible to restring a compound bow without a press. In this blog, we’ll walk you through the steps to safely and properly how to restring a compound bow without a press.
Step 1: Gather the necessary tools
Before beginning the how to restring a compound bow without a press process, gather the necessary tools. These tools include a new bowstring, a bowstring wax, a stringer tool, and a pair of pliers.
Step 2: Remove the old bowstring
The first step in restringing a compound bow is to remove the old bowstring. To do this, locate the bow’s cable slide and loosen the cable(s) by turning the bow’s limb bolts. Once the cables are slack, use your pliers to remove the old bowstring from the bow’s cams.
Step 3: Prepare the new bowstring
Before installing the new bowstring, preparing it by applying bowstring wax is important. This will help protect the bowstring from wear and tear and prolong its lifespan. Apply the wax to the bowstring and work it with your fingers until evenly distributed.
Step 4: Install the new bowstring
To install the new bowstring, use a stringer tool. A stringer tool is a flexible material that wraps around the bow’s limbs and holds them in place while you install the new bowstring. Start by attaching the stringer tool to the bow’s top limb, ensuring it’s securely in place. Then, attach the other end of the stringer tool to the bow’s bottom limb.
Next, take the new bowstring and attach one end to the bow’s top cam. Make sure the bowstring is seated properly in the cam’s groove. Then, attach the other end of the bowstring to the bow’s bottom cam. Again, ensure the bowstring is seated properly in the cam’s groove.
Step 5: Tighten the bowstring
With the new bowstring in place, it’s time to tighten it. To do this, use your pliers to pull the bowstring until it’s tight. Check the bow’s brace height to ensure it’s within the manufacturer’s recommended range. The brace height is the distance between the bow’s grip and the bowstring at rest.
Step 6: Adjust the cables
Once the bowstring is tightened, it’s time to adjust the cables. Start by tightening the bow’s limb bolts until the cables are taut. Then, adjust the cable(s) so they’re centered on the bow’s cable slide.
Step 7: Check for proper alignment
With the new bowstring installed and the cables adjusted, it’s important to check the bow’s alignment. To do this, draw the bow back and check if the cams rotate smoothly and evenly. If they’re not, you may need to adjust the cable(s) further.
Tips for How To Restring a Compound Bow Without a Press
Be cautious:
Restringing a compound bow without a press can be dangerous if not done correctly. Take your time and follow the steps carefully to ensure your safety.
Use a stringer tool:
A stringer tool is essential for restringing a compound bow without a press. It helps hold the bow’s limbs in place and prevents them from snapping back.
Check the brace height:
The brace height is an important measurement for ensuring the proper performance of your compound bow. Check it before and after restringing to ensure it’s within the manufacturer’s recommended range.
Wax the bowstring:
Applying bowstring wax to your new bowstring will help protect it from wear and tear and prolong its lifespan.
Check the cable alignment:
After restringing your bow, it’s important to check the alignment of the cables. Make sure they’re centred on the bow’s cable slide, and adjust them if necessary.
FAQs
Can I restring my compound bow without a press?
Yes, it’s possible to restring a compound bow without a press. However, it’s important to follow the steps carefully and take your time to ensure your safety.
Do I need a stringer tool to restring my compound bow?
Yes, a stringer tool is essential for restringing a compound bow without a press. It helps hold the bow’s limbs in place and prevents them from snapping back.
Can I adjust the brace height of my bow after restringing?
Yes, it’s important to check the brace height of your bow after restringing and adjust it if necessary to ensure proper performance.
How often should I restring my compound bow?
It’s recommended to restring your compound bow every 1-2 years or whenever you notice signs of wear and tear on the bowstring.
Conclusion:
How to restring a compound bow without a press is possible, but it’s important to take your time and follow the steps carefully to ensure your safety and proper bow performance. Gather the necessary tools, prepare the new bowstring with wax, use a stringer tool, tighten the bowstring, adjust the cables, and check for proper alignment. By following these steps and caring for your compound bow, you’ll enjoy optimal performance and accuracy when hunting or shooting.
